UPDATE: Be prepared for strong thunderstorms in Robeson and Bladen counties early Friday evening

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

An updated report from the NWS Wilmington NC was issued on Friday at 3:43 p.m. for strong thunderstorms until 4:15 p.m. for Robeson and Bladen counties.

Residents can be ready for wind gusts of up to 50 mph.

"At 3:43 p.m., Doppler radar tracked a strong thunderstorm near Buie, or near Lumberton, moving northeast at 40 mph," states the NWS. "Gusty winds could knock down tree limbs and blow around unsecured objects."

Locations impacted by the alert include Lumberton, Red Springs, Pembroke, Maxton, St. Pauls, Howellsville, Rex, Duart, Tolarsville, Hestertown, Shannon, Buie, Robeson Community College, Tobermory, Wakulla, Barker Ten Mile, Jerome, Prospect, Elrod and Parkton. This includes Interstate 95 in North Carolina between mile markers 9 and 38.

The NWS comments, "If outdoors, consider seeking shelter inside a building."

This alert is in effect until 4:15 p.m.

How to react when facing a lightning hazard?

Lightning hits the United States approximately 25 million times annually. The majority of these strikes happen during the summer, causing around 20 fatalities each year, according to the NWS. The likelihood of lightning increases as a thunderstorm gets closer and reaches its highest point when the storm is directly overhead. This risk decreases as the storm moves away.

Here are suggestions for staying safe during a thunderstorm:

• To decrease the risk of getting struck by lightning, when you go outside, establish a plan to reach a safer place.
• If the sky becomes menacing and thunder becomes audible, seek out a safe place to seek shelter.
• Once inside, avoid contact with corded phones, electrical equipment, plumbing, and windows and doors.
• Wait for 30 minutes after the final lightning or thunder before heading outside again.

If finding indoor shelter is not an option:

• Avoid open fields, hill peaks, or ridge tops.
• Stay away from tall, isolated trees or other tall objects. If you are in a forest, stay near a lower stand of trees.
• If you are in a group, disperse to prevent the current from passing between group members.
• If you are camping in an open setting, set up camp in a valley, ravine, or other low spot. Bear in mind, a tent does not protect you from lightning.
• Maintain a safe distance from water, wet items, and metal objects. Water and metal do not attract lightning, yet they conduct electricity efficiently.

What to do in the rain on the road?

• Turn on your headlights - Even when it's light outside, using headlights can improve visibility and alert other drivers to your presence.
• While on the road - Opt for the middle lanes and remain on higher ground. Rainwater tends to gather along the road edges.
• Keep clear of puddles - Driving through puddles or low rainwater areas can cause vehicles to hydroplane or skid out of control
• Give ample space to large vehicles - Trucks or buses can create a water spray that diminishes visibility.
• Steer clear of flooded areas - When coming to a flooded road, turn around and head back. Flash flooding currents are strong and can sweep drivers off roadways. Driving through deep water can also affect a vehicle's mechanical and electrical systems.

What is hydroplaning?

Hydroplaning occurs when a vehicle begins to slide uncontrollably on wet roads.

This happens when water in front of the tire builds up faster than the vehicle's weight can push water out of the way. The water pressure then causes the vehicle to rise and slide on a thin layer of water between the tires and the road, making the driver lose control. The top three contributors to hydroplaning are:

1. Vehicle speed - When a vehicle's speed increases, the tire-traction grip and ability to control the vehicle decreases. Drive at a reduced speed during wet weather.
2. Water depth - The deeper the water, the sooner a vehicle loses traction on the road. It doesn't matter how deep the water is, even a thin layer can lead to hydroplaning.
3. Tire tread depth - Checking your tire tread before hitting the road is important, as low or no tread can lead to sliding.

In the event of your vehicle hydroplaning, here's what to know:

• Ease off the accelerator - Step off the gas to slow down the vehicle until the tires find traction.
• Turn into the skid - Turning into the skid can help the vehicle's tires realign to regain control.
• Make sure the tires reconnect with the road - During the skid, wait until the tires reconnect with the road and then gently straighten the wheels to regain control.
• Brake gently as needed - Brake normally if the vehicle has anti-lock brakes and pump brakes gently if in an older vehicle.

Source: The National Weather Service

United Robots North Carolina

This story was originally published June 26, 2026 at 3:50 PM.