Weather News

UPDATE: Weather alert issued for strong thunderstorms in Ashe and Wilkes counties Sunday afternoon

unitedrobots photography

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

An updated weather alert was issued by the NWS Blacksburg VA on Sunday at 1:16 p.m. for strong thunderstorms until 1:45 p.m. for Ashe and Wilkes counties.

Residents may experience wind gusts of up to 40 mph.

"At 1:16 p.m., Doppler radar tracked a strong thunderstorm over Summit, or near Wilbar, moving east at 25 mph," says the NWS. "Gusty winds could knock down tree limbs and blow around unsecured objects."

Locations impacted by the alert include North Wilkesboro, Wilkesboro, Wilbar, Mc Grady, Mulberry, Wilkesboro Reservoir and Buck.

The NWS adds, "If outdoors, consider seeking shelter inside a building."

This alert is in effect until 1:45 p.m.

unitedrobots photography

Actions to take when lightning threat is imminent

Around 25 million lightning strikes occur in the United States every year, with most taking place during the summer months. The NWS reports that these strikes result in about 20 fatalities annually. The probability of lightning strikes rises as a thunderstorm approaches and peaks when the storm is directly above. As the storm moves away, this likelihood decreases.

Here are suggestions for staying safe during a thunderstorm:

  • To minimize risk of being struck by lightning, when going outside, have a plan to get to a safer place.
  • If the sky turns ominous and thunder can be heard, find a secure place for shelter.
  • Once indoors, avoid touching corded phones, electrical equipment, plumbing, and windows and doors.
  • Wait for 30 minutes after the final lightning or thunder before heading outside again.

If finding indoor shelter is not an option:

  • Steer clear of open fields, hilltops, or ridge tops.
  • Stay away from tall, isolated trees or other tall objects. If you are in a forest, stay near a lower stand of trees.
  • If you are with a group, fan out to stop the current from transmitting between members.
  • If you are camping in an open area, set up camp in a valley, ravine, or other low area. Remember, a tent offers no protection from lighting.
  • Keep a distance from water, wet articles, and metal objects. While water and metal do not draw lightning, they are proficient conductors of electricity.

What steps to follow when driving in the rain?

  • Turn on headlights - Even in daylight, using headlights can help improve visibility and let other drivers know where you are.
  • While on the road - Opt for the middle lanes and remain on higher ground. Rainwater tends to gather along the road edges.
  • Avoid puddles - Driving into puddles or low rainwater areas can lead to vehicles hydroplaning or losing control.
  • Do not follow large vehicles closely - Large vehicles like trucks or buses can create a spray of water that can reduce your visibility.
  • Avoid flooded zones - If you encounter a flooded road, make a U-turn and go back. The powerful currents of flash floods can carry drivers off the road. Driving through deep water can also damage a vehicle's mechanical and electrical systems.

What is hydroplaning?

Hydroplaning is the term for when a vehicle begins sliding uncontrollably on wet roads.

This happens when water in front of the tire builds up faster than the vehicle's weight can push water out of the way. The water pressure then causes the vehicle to rise and slide on a thin layer of water between the tires and the road, making the driver lose control. The top three contributors to hydroplaning are:

  1. Vehicle speed - When a vehicle's speed increases, the tire-traction grip and ability to control the vehicle decreases. Drive at a reduced speed during wet weather.
  2. Water depth - The deeper the water, the sooner a vehicle loses traction on the road. It doesn't matter how deep the water is, even a thin layer can lead to hydroplaning.
  3. Tire tread depth - Checking your tire tread before hitting the road is important, as low or no tread can lead to sliding.

In the event of your vehicle hydroplaning, here's what to know:

  • Ease off the accelerator - Step off the gas to slow down the vehicle until the tires find traction.
  • Turn into the skid - Turning into the skid can help the vehicle's tires realign to regain control.
  • Make sure the tires reconnect with the road - During the skid, wait until the tires reconnect with the road and then gently straighten the wheels to regain control.
  • Brake gently as needed - Brake normally if the vehicle has anti-lock brakes and pump brakes gently if in an older vehicle.

Source: The National Weather Service

United Robots North Carolina

This story was originally published June 14, 2026 at 12:22 PM.

Get unlimited digital access
#ReadLocal

Try 1 month for $1

CLAIM OFFER