Weather News

Weather alert for Robeson and Bladen counties Monday midday, says the NWS

unitedrobots photography

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

The NWS Wilmington NC issued a weather alert at 11:26 a.m. on Monday for strong thunderstorms until 12:15 p.m. for Robeson and Bladen counties.

Residents can look for wind gusts of up to 40 mph.

"At 11:26 a.m., Doppler radar tracked a strong thunderstorm near Smiths, or near Lumberton, moving northeast at 40 mph," adds the NWS. "Gusty winds could knock down tree limbs and blow around unsecured objects."

Locations impacted by the alert include Lumberton, Elizabethtown, Bladenboro, Smiths, Howellsville, Bladen Community College, Duart, Tolarsville, Ammon, Butters, Hestertown, Tobermory, Ruskin, White Oak, Jerome, Barker Ten Mile, White Lake, Dublin, Tar Heel and Southeastern Regional Medical Center.

The NWS states, "If outdoors, consider seeking shelter inside a building."

This alert is in effect until 12:15 p.m.

unitedrobots photography

Actions to take when lightning threat is imminent

Around 25 million lightning strikes occur in the United States every year, with most taking place during the summer months. The NWS reports that these strikes result in about 20 fatalities annually. The probability of lightning strikes rises as a thunderstorm approaches and peaks when the storm is directly above. As the storm moves away, this likelihood decreases.

Here are suggestions for staying safe during a thunderstorm:

  • To minimize risk of being struck by lightning, when going outside, have a plan to get to a safer place.
  • If the sky turns ominous and thunder can be heard, find a secure place for shelter.
  • Once inside, abstain from touching corded phones, electrical devices, plumbing, and windows and doors.
  • Wait for 30 minutes after the final lightning or thunder before heading outside again.

If finding indoor shelter is not an option:

  • Avoid open fields, the top of a hill, or a ridge top.
  • Stay away from tall, isolated trees or other tall objects. If you are in a forest, stay near a lower stand of trees.
  • If you are with a group, fan out to stop the current from transmitting between members.
  • If you are camping in an open space, choose a valley, ravine, or low area for your campsite. Remember, tents do not shield you from lightning.
  • Do not approach water, wet objects, or metal items. Although water and metal do not attract lightning, they conduct electricity effectively.

What to do in the rain on the road?

  • Turn on your headlights - Even when it's light outside, using headlights can improve visibility and alert other drivers to your presence.
  • While on the road - Opt for the middle lanes and remain on higher ground. Rainwater tends to gather along the road edges.
  • Keep clear of puddles - Driving through puddles or low rainwater areas can cause vehicles to hydroplane or skid out of control
  • Don't tail large vehicles closely - Trucks or buses can kick up a water spray that obstructs visibility.
  • Avoid flooded areas - When encountering a flooded road, do a U-turn and head back. The strong currents from flash floods can pull drivers off roadways. Driving through deep water can also negatively affect a vehicle's mechanical and electrical systems.

What is hydroplaning?

Hydroplaning is the term for when a vehicle begins sliding uncontrollably on wet roads.

This happens when water in front of the tire builds up faster than the vehicle's weight can push water out of the way. The water pressure then causes the vehicle to rise and slide on a thin layer of water between the tires and the road, making the driver lose control. The top three contributors to hydroplaning are:

  1. Vehicle speed - When a vehicle's speed increases, the tire-traction grip and ability to control the vehicle decreases. Drive at a reduced speed during wet weather.
  2. Water depth - The deeper the water, the sooner a vehicle loses traction on the road. It doesn't matter how deep the water is, even a thin layer can lead to hydroplaning.
  3. Tire tread depth - Checking your tire tread before hitting the road is important, as low or no tread can lead to sliding.

In the event of your vehicle hydroplaning, here's what to know:

  • Ease off the accelerator - Step off the gas to slow down the vehicle until the tires find traction.
  • Turn into the skid - Turning into the skid can help the vehicle's tires realign to regain control.
  • Make sure the tires reconnect with the road - During the skid, wait until the tires reconnect with the road and then gently straighten the wheels to regain control.
  • Brake gently as needed - Brake normally if the vehicle has anti-lock brakes and pump brakes gently if in an older vehicle.

Source: The National Weather Service

United Robots North Carolina

This story was originally published May 11, 2026 at 11:31 AM.

Get unlimited digital access
#ReadLocal

Try 1 month for $1

CLAIM OFFER